Solo - Cold Laminator

Solo - Cold Laminator  - Click to enlarge
Solo - Cold Laminator  - Click to enlarge
An affordable cold laminator
Great for laminating, mounting prints to boards or applying transfer tapes
Provides many of the features found in more expensive laminators including:
• Heavy duty motor
• Automatic take up shaft
• Shaft for liner paper in front
• Silicone covered rollers
• Rugged steel and aluminum construction
Daige SOLO makes laminating easy.

View a Preview Clip for Solo Introduction
View a Preview Clip for Laminating prints under 5' long
View a Preview Clip for Laminating over 5' Long
View a Preview Clip for Mounting prints to boards
Item Code: D-SOLO1

Mfg List: $1,295.00
Sale Price: $1,279.99
You Save: $15.01 (1%)
Quantity:
Select Options Below

Size: 
 25 Inch Width #Solo25: $1,279.99
 38 Inch Width #Solo38: $1,599.99
 55 Inch Width #Solo55: $2,078.99
 65 Inch Width #Solo65: $2,649.99

Option 1: 
 No Footswitch
 Footswitch: $59.00

Option 2: 
 No Stand
 Rolling Stand #STS-Stand: $249.99

Product Description:
SOLO - Cold Laminator (made in the U.S.A. by Daige)
Perfect for:
  • Laminating wide format wraps, photos and signage
  • Applying transfer tapes and reflective sheeting
  • Mounting prints to boards

    About Solo
    Daige has been making laminators for over ten years and is proud to introduce its next generation model- the new SOLO cold laminator! It is so simple to use, it becomes a one-man laminating system. Save thousands of dollars with SOLO as compared to other laminators, while providing you with the essential features found on much more expensive models!

    Major features include:
  • Top and bottom nip rollers are covered with hard silicone
  • Rigid steel cores in top roller for better pressure
  • Rugged steel and aluminum construction
  • Automatic take up shaft
  • Heavy duty motor
  • Spring loaded top roller
  • Accommodates boards up to 1/2” thick (can be made for 1” thick boards upon request).
  • Available in 25", 38", 55" and 65" widths.

    Laminating
    With your Solo you can laminate media from long wraps down to smaller inkjet photos. Even if you are using solvent or archival inks, laminating offers important benefits:
  • Provides scratch resistance and UV protection
  • Protects from chemicals, dirt and fingerprints
  • Extends the life of the print
  • Keeps your print looking great during its entire life
  • Cold laminates have excellent clarity
  • Prints look more vibrant
  • Variety of finishes: gloss, luster or matte

    Professional Mounting
    SOLO will apply adhesives to boards, then roll down the print to the board quickly, easily and smoothly. It eliminates the hassles of squeegeeing by hand or the high cost of contracting out your mounting work!

    Options - Stand and Footswitch
    Stand has four casters, providing mobility and saving table space. Footswitch provides hand free control.

    Cold Laminates
    Daige carries a full line of cold laminates in finishes including gloss, luster and matte. They provide excellent scratch resistance , UV and moisture protection. Great for indoor and outdoor use. Available in a wide range of widths.

    Do not let laminating or mounting intimidate you. Just follow the easy steps shown in the videos and you will get great results.

    Specifications:
  • Roller Widths 25", 38", 55" or 65"
  • Board Thickness up to 1" thick
  • Speed 8 seconds per foot (or 7.5 ft. per minute)
  • Electrical 110 volt (U.S.) or 230 volts (for overseas)

    Outside Dimensions:
    25": 17" W x 31" L
    38": 17" W x 44" L
    55": 17" W x 61" L
    65": 17" W x 71" L

    The shipping weight of 55" is 147 lbs and it can only be shipped by truck. The weight without packaging is about 120 lbs.

    (Replaces the Daige Quikmount 4)

    An affordable cold laminator!

    Great for laminating, mounting prints to boards or applying transfer tapes.

    Makes laminating easy.

    Works very well for laminating and mounting photos to gator.

    The 25" would be fine for 24" photos.

    A roll of 25" gloss laminate is appx. $114 and 25" adhesive is $180. Ordering instructions for these will come with your machine, or request it with above prices in the comment-box at check-out.

    Great price for a Laminator!

    {Oversize Shipping: $188.95}

    View a Preview Clip for Solo Introduction
    View a Preview Clip for Laminating prints under 5' long
    View a Preview Clip for Laminating over 5' Long
    View a Preview Clip for Mounting prints to boards


  • Customer Reviews

    Product Reviews

    5 out of 5, Based on 1 Reviews.
    Write a Review
    Lexington KY
    May 02, 2013

    Nice sturdy piece of hardware.